Special Tools
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Puller - Unit Injector T10055 with Puller - Unit Injector - Adapter 1T10055/1 and Puller - Unit Injector - Adapter 3T10055/3
- O-Ring Assembly Sleeve T10377
- Diesel Engine Tool Set - 17 mm T10395A with suitable socket
- Union Nut Socket T40055
- Socket - 27 mm T40218
- Locking Pin T40245
- High Pressure Pump Shaft Holder T40248 or High Pressure Pump Shaft Holder T40292 (depending on the version, different adapters are installed)
- Crankshaft Turning Tool T40257
- Wrench - 21 mm T40263
- High Pressure Pump Shaft Holder T40292
- Adapter T40314
- Torque Wrench 1331 Insert - Reversible Ratchet VAG 1331/1
- Torque Wrench 1331 Insert - Open Jaw - 17 mm VAG 1331/6
- Hand Vacuum Pump VAS 6213
- Fuel Return System Tester VAS 6330
- Hose Clip Pliers VAS 6362
- Test Adapter - Isolator Box 1 - Breakout Box with Detachable Terminals (198 pins) VAS 6606/1-1
- Test Adapter - Isolator Box 1 - Breakout Box with Detachable Terminals (198 pins) VAS 6606/1-2
- Test Adapter - Isolator Box 1 - Breakout Box with Detachable Terminals (198 pins) VAS 6606/1-3
- Template VAS 6606/1-1
- Template VAS 6606/2-1
- Template VAS 6606/3-1
- Test Adapter for ECU (1.0m) VAS 6606/7-1 and Test Adapter for ECU (1.7m) VAS 6606/7-2.
- Return Flow Meter VAS 6684
- Pry Lever 80-200
- Hose Clamps - Up To 25 mm 3094