Engine Sound Generator Control Module -J943-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connector And Unclip The Engine Sound Generator Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Remove the upper frame for the control module, refer to CONTROL MODULE UPPER FRAME .

-- Disconnect the connector -4- and unclip the Engine Sound Generator Control Module -J943-.

NOTE:

Ignore the other -items-.