Throttle Valve Control Module -J338-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connector At The Throttle Valve Control Module, Screw Clamp & Air Guide Hose

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Loosen the clamp -3- and remove the air guide hose.

-- Disconnect the connector -1-.

-- Remove the bolts -2- and the Throttle Valve Control Module -J338-.