LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (3.0L - Diesel Fuel Injection - Engine Code: CPNB) >> 23 Diesel Fuel Injection >> Intake Manifold >> Intake Manifold, Removing And Installing >> Installing

Intake Manifold, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals 

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

To mount the air guide hoses on their connectors securely, spray the bolts on the used clamps with rust remover before installing.

-- Install the high pressure line, refer to HIGH PRESSURE LINES, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals