LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (3.0L - Lubrication - Engine Code(S): CGXB & CTUA) >> 17 Lubrication >> Crankcase Housing Ventilation >> Oil Separator, Removing And Installing >> Removing

Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the crankcase ventilation hoses, refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .

-- Remove the upper coolant pipe, refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Remove the left lower section of the intake manifold, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the high pressure lines and oil separator cover -1-.

Fig 1: Identifying Oil Separator Cover
GWWA17-10207Courtesy of AUDI OF AMERICA, LLC