LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (3.0L - Lubrication - Engine Code(S): CGXB & CTUA) >> 17 Lubrication >> Crankcase Housing Ventilation >> Oil Separator, Removing And Installing >> Installing

Oil Separator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

-- Install the lower intake manifold section, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Install the upper coolant pipe, refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Install the crankcase ventilation hoses, refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .