LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (3.0L - Lubrication - Engine Code(S): CGXB & CTUA) >> 17 Lubrication >> Crankcase Housing Ventilation >> Crankcase Ventilation Hoses, Removing And Installing >> Crankcase Ventilation Hoses, Removing And Installing, Rest Of World Vehicles >> Removing

Crankcase Ventilation Hoses, Removing And Installing, Rest Of World Vehicles: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Crankcase Ventilation Hoses
GWWA17-10433Courtesy of AUDI OF AMERICA, LLC
NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the supercharger, refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the crankcase ventilation hoses -arrows- from the cylinder head covers.

-- Free up the crankcase ventilation hoses.

-- Remove the bolt -1- and the connections for the crankcase ventilation hoses.