Engine Oil Cooler Thermostat
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- For the temperature regulator for the engine oil cooler
- Removing and installing, refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .
- Bolt
- Replace
- Tightening specification and sequence, refer to Fig 2.
- O-Ring
- Replace
- Engine Oil Cooler Thermostat
- Removing and installing, refer to ENGINE OIL COOLER THERMOSTAT, REMOVING AND INSTALLING .
- Sealing Flange
- Belt pulley side
- Removing and installing, refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .