Cover In The Inner-V, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the seal and O-rings.
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Clean the oil screen -arrow- and install it in the cover.
-- Install the charge air cooler housing, refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .