Overview - Engine Oil Cooler, Front Engine Oil Cooler

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Oil Cooler, Front Engine Oil Cooler Overview

Courtesy of AUDI OF AMERICA, LLC

O-Rings
- Replacing
Bolt
- Tightening specification and sequence, refer to Fig 2.
Engine Oil Cooler
- Removing and installing, refer to ENGINE OIL COOLER, REMOVING AND INSTALLING, FRONT .
- Change the coolant after replacing

Fig 2: Oil Cooler Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten bolts in stages as follows:

Step	Bolts	Tightening specification
1.	-1 to 7-	3 Nm
2.	-1 to 7-	9 Nm