LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (4.0L - Lubrication - Engine Code(S): CEUC & CRDB) >> 17 Lubrication >> Crankcase Housing Ventilation >> Oil Separator, Removing And Installing >> Installing

Oil Separator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the sealing ring, the seal and the O-ring.

-- Note the installed position of the seal, refer to Figure.

-- Install the charge air cooler housing, refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .