Piston Projection, Measuring At Top Dead Center (TDC): Notes
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Measure the piston projection at "TDC" whenever installing a new piston or new part of the engine.
Special tools and workshop equipment required
- Measuring Bar VW 382/7 from the Special Socket & Measuring Tools VW 382
- Measuring Set - Magnetic Plate - 50 mm VW 385/17 from Measuring Set VW 385
- Dial Gauge - 0-10 mm VAS 6079