LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.0L - Crankshaft & Cylinder Block - Engine Code: CPNB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Auxiliary Components Bracket, Removing And Installing >> Removing

Auxiliary Components Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts & Left Front Coolant Pipe
GWWA13-10869Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Remove the Air Conditioning (A/C) compressor, refer to A/C Compressor Regulator ValveN280, Removing and Installing .

-- Remove the bolts -arrows- and the A/C compressor bracket.

NOTE: Ignore items -1 and 2-.