Ribbed Belt, Removing And Installing, Accessory Ribbed Belt: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ribbed Belt Routing Through Items -1 To 6-

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Place the ribbed belt over the pulley as illustrated.

Generator
Idler Roller
Coolant Pump
A/C Compressor
Ribbed belt tensioner
Vibration damper

NOTE:

When installing the ribbed belt, make sure it is seated correctly on the pulleys.

-- Install the left front coolant pipes, refer to FRONT LEFT COOLANT PIPES, REMOVING AND INSTALLING .

-- Start the engine and check the belt routing.

-- Install the compressor ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING, SUPERCHARGER RIBBED BELT .