LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CGXB & CTUA) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONER, Removing And Installing, Supercharger Ribbed Belt >> Removing

Ribbed Belt TENSIONER, Removing And Installing, Supercharger Ribbed Belt: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the A/C compressor ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING, SUPERCHARGER RIBBED BELT .

-- Remove the bolt -1- and remove the ribbed belt tensioner -2-.

Fig 1: Identifying Ribbed Belt Tensioner -2- And Bolt -1-
GWWA13-10654Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals