Overview - Balance Shaft
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
- Balance Shaft
- Removing and installing, refer to BALANCE SHAFT, REMOVING AND INSTALLING .
- Bolt
- 60 Nm
- For loosening and tightening, use the Locating Pin T40116 as a counter holder
- Balance Shaft Transmission Side
- Can only be placed on the balance shaft in one position
- Gear Carrier
- Bolt
- 13 Nm
- Balance Shaft Belt Pulley Side
- Can only be placed on the balance shaft in one position
- Bolt
- 60 Nm
- For loosening and tightening, use the Locating Pin T40116 as a counter holder