Vibration Damper, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Audi S6/RS6/RS7:
-- Remove the radiator, with the fan shroud, refer to RADIATOR, REMOVING AND INSTALLING, AUDI S6/S7 .
Audi S7:
-- Remove the fan shroud, refer to FAN SHROUD, REMOVING AND INSTALLING .
Continuation for All Vehicles:
-- Loosen the vibration damper bolts -arrow- a few turns by counter-holding the wrench on the generator ribbed belt pulley nut.
-- Remove the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the bolts -arrow- and remove the vibration damper.