LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (4.0L - Crankshaft & Cylinder Block - Engine Code(S): CEUC & CRDB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt Tensioner, Removing And Installing >> Installing

Ribbed Belt Tensioner, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Install the front lower coolant pipe, refer to LOWER FRONT COOLANT LINES, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals