LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Self-Leveling Suspension) >> 43 Self-Leveling Suspension >> Dynamic Ride Control (DRC) >> Electronic Damping Control Module -J250-, Removing And Installing >> Removing

Electronic Damping Control Module -J250-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off all electrical consumers.

-- Remove the cover from the right luggage compartment storage compartment.

-- Release and remove the connectors from the control module -1-.

Fig 1: Electronic Damping Control Module Location
GWWA43-10283Courtesy of AUDI OF AMERICA, LLC

-- Remove the control module from its bracket.