Ribbed Belt Pulley Without Freewheel, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the generator if necessary, refer to REMOVAL AND INSTALLATION .
-- For some engine types the removal can be performed with the generator still installed, here only the ribbed belt must have the tension released and be removed.
-- If present, press the protective cap off the generator pulley.
-- Counterhold nut using Generator Belt Socket 3310 and rotate generator shaft clockwise to loosen it.
-- Remove ribbed belt pulley.