Seat Heating Control Module -J882-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bench seat. Refer to REAR BENCH SEAT, REMOVING AND INSTALLING .
-- Slightly lift the sill panel strip above the control module -3- and disengage the control module with the bracket -1- from the wiring guide -arrow-.
NOTE:
In addition, the mount for the control module is bonded to the body with an adhesive pad.
-- Disconnect the connector -2- and remove the seat heating control module.