Locking Mechanism Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Unlock the rear seat backrest.
-- Make sure the button -2- (indicator) is in the >>up<< position.
-- Push the tabs -arrows- on both sides of the trim using a Trim Removal Wedge 3409.
-- Remove the trim -1- upward and off the rear seat backrest -3-.
-- Remove the trim -1- as far as possible upward from the rear seat backrest.
Fig 2: Using A Flat-Head Screwdriver, Pry Clip -Arrow- Located In The Rear Area Of Trim -1- Out Of Retainer
-- Pry the catch -arrow- out of the locking mechanism using a flat blade screwdriver.
-- Remove the trim upward from the rear seat backrest.