CUPHOLDER, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cupholder Trim

Courtesy of AUDI OF AMERICA, LLC

-- Fold down rear center armrest.

-- Pry off the trim -2- using the Trim Removal Wedge 3409.

-- Release the tabs -arrows- starting at the lower edge.

-- Release the tabs -3-.

-- Remove the trim from the rear center armrest.

-- Open the flap -1- on the cupholder.

Fig 2: Flap & Spring

Courtesy of AUDI OF AMERICA, LLC

-- Release the spring -2- using a screwdriver and carefully remove the cupholder alternating between the sides.