Seat Ventilation Control Module (Integrated In Seat Heating), Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnect Connector Front Seat Ventilation Control Module By Pressing Release

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way to the rear and then into its highest position.

-- Press the releases -arrow- disconnect the connector -2- from the seat ventilation control module -1-.

-- Release the tab -arrow 1- with the Trim Removal Wedge 3409.

Fig 2: Release Retaining Strap

Courtesy of AUDI OF AMERICA, LLC

-- Swivel the seat ventilation control module downward -arrow 2-.

-- Disengage and the hook -arrow 3- on the seat ventilation control module from the bracket and remove the module.

NOTE:

Detach the front seat and tilt it to back if the seat ventilation control module is not accessible. Refer to Removing .