Seat Forward/Back Adjustment Release Cable, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to Removing .

-- Fasten the front seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Open the cable tie or unclip the clip on the lower seat frame.

-- Disengage the release cable bracket -1- from the seat forward/back adjustment -2-.

Fig 1: Disengage Release Cable Bracket At Seat Forward/Back Adjuster

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the end of the release cable -arrow- at release cable retainer lever -3- of the seat forward/back adjuster.

-- Disengage the release cable bracket -2- from the seat forward/back adjustment -1-.

Fig 2: Disengage Release Cable That Seat Forward/Back Release Cable Mount

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the release cable -1- that seat forward/back release cable mount -arrow A-.

Fig 3: Disengage Ball-Shaped End Of Release Cable At Seat Adjuster Groove

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the ball-shaped end of the release cable -arrow B- at the seat forward/back adjuster groove.

-- Remove the release cable.