Seat Cushion Blower Fan, Removing And Installing, MULTICONTOUR Seat: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electric Wire, Bolts & Remove The Seat Cushion Fan

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward/up.

Horbiger Multicontour Seat:

-- Disconnect the connector from the seat cushion fan and free up the electric wire -3-.

-- Remove the bolts -2-, -4- on the bracket and remove the seat cushion fan -1-.

Kongsberg Multicontour Seat:

Fig 2: Bolts, Cover & Seat Cushion Blower Fan Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 4- and then remove the cover -3- and the seat cushion blower fan.

-- Disconnect the seat cushion blower fan connector -1-.