LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Safety Ground Lock, Removing And Installing >> Removing

Safety Ground Lock, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bolts & Retaining Plate
GWWA72-11134Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward/up.

-- Remove the bolts -1-.

-- Disengage the retaining plate -2- on the lower seat frame -arrow- and remove.

Fig 2: Safety Ground Lock & Seat Pan Lower Frame
GWWA72-11135Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of damage to the bushing in the bearing point (safety ground lock).

  • The bushing cannot be replaced with workshop materials.
  • If a bushing is damaged, the assembly part must be replaced.

-- Remove safety ground lock -1- from the mounting pin on the seat pan lower frame -2-.

scientia non olet · About LEMON Manuals