Release Cable Retainer/Seat Forward/Back Adjustment Lever And Spring, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Installation is performed in reverse order of removal, noting the following:
NOTE:
The release cable retainer lever is the same for the driver and front passenger seat. The spring is different for the driver and front passenger seat.
Release Cable Retainer with Installed Spring for the Left Seat:
-- Attach the spring at points -1- and -2-.
-- Turn the spring -3- clockwise.
-- Place the spring around tab -4- so that it is touching -5-.
Release Cable Retainer with Installed Spring for the Right Seat:
-- Attach the spring at points -1- and -2-.
-- Turn the spring -3- counter-clockwise.
-- Place the spring around tab -4- so that it is touching -5-.