Seat Angle Adjustment Handle, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Replace the clip on the seat angle adjuster lever. Pay attention to the installed position.
-- Make sure the seat height adjustment handle engages correctly with the clip.
- The springs -arrows- (quantity: two) on the clip -2- must be on the inner side of the lever -1-.