LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Overview - Front Backrest >> Overview - Front Backrest, Backrest Adjuster

Overview - Front Backrest, Backrest Adjuster

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For the sake of clarity, seat cushion and seat cover are not depicted.

Fig 1: Overview Of Front Backrest, Backrest Adjuster
GWWA72-11165Courtesy of AUDI OF AMERICA, LLC
  1. Shaft
    • The threaded hole for the nut -8- must be cleaned, for example, with a thread tap.
    • Coat the threads on the shaft with locking fluid before installing the nut. For the correct locking fluid .
  2. Driver Backrest Adjustment Motor -V45-
  3. Rivet
    • Quantity: 2
  4. Bracket
  5. Bolt
    • 3.7 Nm
    • Replace
    • Clean the threaded hole with a thread tap.
    • Use locking fluid when installing the bolt. For the correct locking fluid .
  6. Backrest Frame
  7. Washer
  8. Nut
    • 6 Nm
    • Replace
scientia non olet · About LEMON Manuals