Backrest Cover, Removing And Installing, MULTICONTOUR Seat Without Optional Equipment: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Install backrest cover with catches at the bottom of the backrest frame.
-- Insert the clips together with hooks into the guides on the backrest cover.
-- Forcefully press backrest cover in the direction of the backrest until the clips engage audibly.
-- Check if the backrest cover is correctly latched.