Connection Diagram - Pneumatic System, H O RBIGER MULTICONTOUR Seat
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Driver Multicontour Seat Compressor -V439-
- Front passenger side: Front Passenger Multicontour Seat Compressor -V440-
- Module Carrier with Air Cushions for Lumbar Support
- Left Seat Bolster Inflation Adjuster
- Left Backrest Bolster Inflation Adjuster
- Restrictor
- For exhaust air
- Depending on the version, separate component or integrated in the multi-contour seat control module
- The connection for the restrictor has been removed from the multicontour seat control module with an integrated restrictor.
- Check Valve
- Depending on the version, separate component or integrated in the multi-contour seat control module
- Remove the external check valve if installing a multicontour seat control module that contains a check valve.
- Valve Block 2 in Driver Seat -N476- for the massage mat
- Front passenger side: Valve Block 2 in Front Passenger Seat -N478- for the massage mat
- Massage Mat
- Valve Block 1 in Driver Seat -N475- for the massage mat
- Front passenger side: Valve Block 1 in Front Passenger Seat -N477- for the massage mat
- Driver Multicontour Seat Control Module -J873-
- Front passenger side: Front Passenger Multicontour Seat Control Module -J872-
- The connection for the restrictor is deleted on the Original Replacement Part with an integrated check valve and the separate check value must be removed.
- Pulsation Damper
- Right Backrest Bolster Inflation Adjuster
- Right Seat Bolster Inflation Adjuster