LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Backrest Bolster Adjuster, Removing And Installing >> Backrest Bolster Adjuster, Removing And Installing, H O RBIGER MULTICONTOUR Seat >> Removing

Backrest Bolster Adjuster, Removing And Installing, H O RBIGER MULTICONTOUR Seat: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remove Bolt
GWWA72-11172Courtesy of AUDI OF AMERICA, LLC

-- Remove the backrest cover with the backrest cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .

-- Remove bolt -1-, release lock -arrow-.

-- Disconnect the pneumatic lines -1- and -3- at the line connector -2-.

Fig 2: Pneumatic Lines & Line Connector
GWWA72-11248Courtesy of AUDI OF AMERICA, LLC