LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Exterior Lights & Switches) >> 94 Exterior Lights, Switches >> Removal And Installation >> License Plate Lamps -X4- / -X5-

License Plate Lamps -X4- / -X5-

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Removal 

Fig 1: Identifying License Plate Lamp Bulb
GWWA94-10505Courtesy of AUDI OF AMERICA, LLC

-- Turn the headlamp switch to "0".

-- Position a screwdriver -1- at the slit and slide it in -direction of arrow- and remove the license plate lamp -2- from the rear lid.

-- Vehicles without LED-bulbs: Remove the bulb -3- out of the clamping socket.

Installation 

Install in reverse order of removal. Note the following:

NOTE:

The entire license plate lamp must be replaced if an LED is faulty.