Front Side Airbag With Igniter, Removing And Installing, Multicontour Seat: Removing
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Follow the additional safety precautions when working with the side airbag. Refer to SIDE AIRBAG ADDITIONAL SAFETY PRECAUTIONS .
- Follow all regulations when disposing of pyrotechnic components. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, STORING, TRANSPORTING AND DISPOSING .
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, MULTICONTOUR SEAT WITHOUT OPTIONAL EQUIPMENT and BACKREST COVER, REMOVING AND INSTALLING, MULTICONTOUR SEAT WITH OPTIONAL EQUIPMENT .
-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING, MULTICONTOUR SEAT .
-- Fold back the upholstery on the backrest near the side airbag until the side airbag is accessible. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Pull the backrest cover near the side airbag carefully as far as possible forward.
-- Remove the bolt -5-.
-- Disengage the side airbag -2- from the backrest frame -arrow- using the hook -4-.
-- Remove the side airbag from the cushion protection -3- while guiding the side airbag wiring harness -1- out after it.
-- Backrest cover with sewn pocket: Remove the side airbag from the bottom of the pocket sewn into the backrest cover.