Seat Position Sensor, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
The seat position sensor is provided as a replacement part with the wiring harness and the black 10-pin harness connector. The following wires with connectors are contained in the wiring harness:
- Wire with seat belt latch coupling connector (driver seat).
- Wire with seat belt latch coupling connector (passenger seat).
- Wire with Front Passenger Seat Occupant Sensor -G128- coupling connector.
- Market-specific: Wire with Passenger Occupant Detection System Control Module -J706- coupling connector with Passenger Occupant Detection System Pressure Sensor -G452-.