Outer Rear Seat Belt Guide, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Insert the belt into the depression in the belt guide -1- and then place the belt guide on onto the bracket.
-- Insert the seat belt guide with the bolt heads -3- in the guides on the bracket.
-- Press the belt guide down while pulling it forward. This engages the bolt heads in the guides.
-- Pull the belt webbing forward until the retaining hooks engage audibly.