Front Seat Belt Latch, Removing And Installing, Multicontour Seat: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Always clean the threaded holes for the self-locking bolts, for example, using a thread tap.

-- Replace the screw for the seat belt latch.

Deactivating the Front Passenger Airbag on Vehicles with Passenger Occupant Detection System:

-- If the seat belt latch of the passenger occupant detection system for front passenger airbag deactivation is replaced, fill out the system registration sheet with the serial number and bar code label from the new seat belt latch and send it to the importer.

Continuation for all vehicles:

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
Observe all measures when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .