Passenger Occupant Detection System, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The passenger occupant detection system is only installed in the front passenger seat.
WARNING:
The replacement part (Service Kit) for the passenger occupant detection system (country-specific) is already pre-installed. Never disconnect the connector between the Passenger Occupant Detection System Control Module -J706- and the Passenger Occupant Detection System Pressure Sensor -G452-. The Service Kit differs depending on the seat version and consists of:
Standard seat/sport seat/super sport seat:
- Seat cushion with/without a seat heating element
- Passenger Occupant Detection System Pressure Sensor -G452- attached to the seat cushion or seat heating element
- Passenger Occupant Detection System Control Module -J706-
Multi-contour seat:
- Passenger Occupant Detection System Pressure Sensor -G452- sewn in with seat heating element in the seat cover
- Passenger Occupant Detection System Control Module -J706-