LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Wires - General Information) >> 97 Wires >> Wiring Harness And Connector Repairs >> Wiring Harness Repair Set >> Release Tool Set VAS 1978/35

Release Tool Set VAS 1978/35

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

The Release Tool Set VAS 1978/35 is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools which can be used to professionally release or assemble e.g. round connector systems, flat terminals with one or two locks as well as single wire seals.

Fig 1: Identifying Release Tool Set (VAS 1978/35)
GWWW00-10402Courtesy of AUDI OF AMERICA, LLC

The allocation of the correct release tools to the respective locking mechanisms can be found in the table in the Release Tool Set VAS 1978/35 Operating Instructions.