LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Wires - General Information) >> 97 Wires >> Wiring Harness And Connector Repairs >> Tool Descriptions >> Crimping Pliers -.35-2.5 mm VAS 1978/1A >> Notes

Crimping Pliers -.35-2.5 mm VAS 1978/1A: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

The Crimping Pliers -.35-2.5 mm VAS 1978/1A or the Wiring Harness Repair - Crimping Plier - Base Tool VAS 1978/1-2 together with the Wiring Harness Repair - Crimping Head -.35-2.5 mm VAS 1978/1-1, or the Wiring Harness Repair Set - Crimping Head - 4-6 mm VAS 1978/2A from the wiring harness repair set is used to compress the crimp connectors.

Fig 1: Crimping Pliers
GWWN97-10491Courtesy of AUDI OF AMERICA, LLC

Crimp connectors, press using the Crimping Pliers -.35-2.5 mm VAS 1978/1A.

The following crimping heads are available for the Wiring Harness Repair - Crimping Plier - Base Tool VAS 1978/1-2:

In conjunction with Wiring Harness Repair Set - Crimping Head - JPT VAS 1978/9-1, crimping pliers are used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35 mm2 .