Primary Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

The primary lock is the locking mechanism of an individual crimp contact in the connector housing.

If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts, refer to SECONDARY LOCK .

The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the primary lock.

Round connector systems, refer to ROUND CONNECTOR SYSTEMS .
Flat connector systems, refer to FLAT CONNECTOR SYSTEMS .
Special connector systems, refer to SPECIAL CONNECTOR SYSTEMS .

The allocation of the correct release tool for the respective locks can be found in the table in the Release Tool Set VAS 1978/35 Operating Instructions.