LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Interior Trim) >> 70 Interior Trim >> Passenger Compartment Trim >> Sill Panel Strip, Removing And Installing >> Rear Sill Panel Strip, Removing And Installing >> Removing

Rear Sill Panel Strip, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Sill Panel Trim Components
GWWA70-11369Courtesy of AUDI OF AMERICA, LLC

-- Remove the lower B-pillar trim panel. Refer to LOWER B-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the rear bench seat. Refer to REAR BENCH SEAT, REMOVING AND INSTALLING .

-- Remove the side cushion. Refer to SIDE CUSHION, REMOVING AND INSTALLING .

-- Unclip the sill panel strip -1- from the sill panel strip and side panel starting at the front -arrows- using a Trim Removal Wedge 3409.

-- Pull the sill panel strip downward off the C-pillar trim and remove it.