Mounting Bracket, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert mounting bracket in the mount on the windshield frame and affix only loosely with bolts -1 and 3-.
Installation is performed in reverse order of removal, while noting the following:
NOTE:
The mounting bracket can be correctly positioned only when the central tube is installed.
-- First tighten the steering column with the mounting bracket to the central tube. Refer to STEERING COLUMN, REMOVING AND INSTALLING .
-- Then tighten bolts -1- and -3- for mounting bracket.