Terminal 30 Wire Junction: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification, refer to Tightening Specifications Terminal 30 Wire Junction -TV2- .
Install in reverse order of removal. Note the following:
-- Install the strut tower. Refer to TOWER BRACE, REMOVING AND INSTALLING .
-- Connect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .