LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Wiring) >> 97 Wiring >> Removal And Installation >> Relay And Fuse Carriers, Passenger Compartment >> Vehicle Electrical System Control Module -J519- >> Removal

Vehicle Electrical System Control Module -J519-: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Connectors
GWWA97-11270Courtesy of AUDI OF AMERICA, LLC

-- Disengage the relay panel under the instrument panel on the left side and the relay- and auxiliary fuse panels still connected to the mount. Refer to REMOVAL .

-- Disconnect the connectors -1, 2, 5, 6 and 7-.

-- Disconnect the connectors -3 and 4-.

-- To disconnect the electrical connector, press the catch -1-, rotate the retaining bracket in the -direction of the arrow- and remove the connector.

Fig 2: Identifying Catch And Retainer
GWWA90-0199Courtesy of AUDI OF AMERICA, LLC

-- Release the spring -1- and remove the vehicle electrical system control module -2- downward -arrow-.

Fig 3: Identifying Spring And Vehicle Electrical System Control Module
GWWA97-11271Courtesy of AUDI OF AMERICA, LLC