Front Treble Speaker -R20- / -V344- / -R22- / -V345-, Bang & OLUFSEN: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Remove the side speaker trim. Refer to SPEAKER TRIM, REMOVING AND INSTALLINGInstrument Panel .
-- Remove the screws -1- on the Left Front Treble Speaker -R20- -2- and then remove the Left Front Treble Speaker -R20- -2- upward from the centering pins -3-.
Fig 1: Identifying Screws -1- On Left Front Treble Speaker -R20- -2- And Remove Left Front Treble Speaker -R20- -2- Upward From Centering Pins -3-
-- Release and disconnect the connector from the Left Front Treble Speaker -R20- -2-.