MULTIFUNCTION Buttons, Removing And Installing, 3-Spoke Steering Wheel: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal. Note the following:

-- Place the trim panel with mounted multifunction buttons onto the steering wheel.

-- Route the connection cable for the tiptronic switch -2- as illustrated.

Fig 1: Be Careful Of Connectors To Tiptronic Switches

Courtesy of AUDI OF AMERICA, LLC

-- Route the rest of the connection cable, including the connector, into the guides inside the steering wheel.

-- Push the trim panel -2- with multifunction buttons onto the steering wheel -1- until it engages.

Fig 2: Locating Trim With Multifunction Buttons

Courtesy of AUDI OF AMERICA, LLC

-- Finally, check the steering wheel to make sure the wiring is correct.