LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Communication) >> 91 Communication >> Infrared System >> Night Vision System Camera, Removing And Installing >> Removing >> Removing the Protective Window

Removing the Protective Window

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the protective window is no longer water tight due to damage, then the Night Vision System Camera -R212- must be completely replaced. Refer to NIGHT VISION SYSTEM CAMERA, REMOVING AND INSTALLING .

-- Remove the trim. refer to -item 1- in OVERVIEW - Night Vision System Camera -R212- .

-- Push the retaining tabs -arrow- together and turn the cover approximately 90° counter-clockwise.

Fig 1: Turning Cover Approximately 90 Degrees Counter-Clockwise
GWWA44-10231Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover, protective window and seal from the Night Vision System Camera -R212-.

NOTE:

Depending on the removal the seal may be replaced.