Multimedia System Control Head -E380-, REMOVING AND INSTALLING, QW1: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
Four spring tabs hold the Multimedia System Control Head -E380- in the center console.
CAUTION:
The surfaces can get scratched very easily.
Carefully mask all surfaces and parts!
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- With both hands, reach into the opening and remove the Multimedia System Control Head -E380- -1- with a jerk upward -arrows- from the center console -2-.
CAUTION:
Pay attention to the different wire lengths to the connectors!
-- Release and disconnect the connector from the back of the Multimedia System Control Head -E380-.
-- Remove the installed switch. Refer to DESCRIPTION AND OPERATION .